STEP 7. UNPACK APT
a. Attach chain from lifting vehicle or hoist to APT
hooks, and raise it approximately 24 inches
(610 mm) off ground.
b. Cut banding securing hydraulic motor and
hoses to underside of APT.
CAUTION
Hold motor to keep it from dropping to the
ground when cutting band around motor.
c. Route motor and hoses to the left side of the
APT.
Form # 169080
UNLOADING AND ASSEMBLY
d. Secure the motor to the steering cylinder with
e. Remove the two bolts securing wooden stand to
f.
14
shipping wire.
APT pin.
NOTE
Bolt and washer at top of pin keeps pin in
APT when bolts are removed.
Cut banding securing wooden stand to APT and
remove wooden stand.
(continued next page)
Model Year - 2010