MacDon R80 Unloading And Assembly Instructions page 24

e. Secure swivel pin with pin (F) and lynch pin.
f. Assemble PTO driveline male half (G) onto
PTO shaft (H) on APT. Push male half so that
PTO shaft is at its fully compressed length.
III. ATTACH MOWER CONDITIONER TO
TRACTOR
CAUTION
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Set park brake, stop engine and remove key.
b. Remove pin (J) from drawbar extension.
Form # 169080
UNLOADING AND ASSEMBLY
F
G
H
J
L
c. Back up tractor to APT and align hitch member
(K) with pin on drawbar extension (L). Lower jack
so that member engages pin.
M
d. Install hitch-pin (M) and secure with hairpin.
e. Attach driveline (N) to tractor PTO shaft as
follows:
N
1. Position driveshaft onto tractor PTO shaft (O).
2. Pull back collar on driveshaft and push
driveshaft until it locks. Release collar.
f. Route APT safety chain from mower-conditioner
through chain support (P), around drawbar
support and lock the hook (Q) on chain.
Adjust chain length to remove all slack
except what is needed for turns.
22
O
Q
P
IMPORTANT
(continued next page)
Model Year - 2010
K