MacDon R80 Unloading And Assembly Instructions page 17

g. Remove bolt and washer securing pin to APT.
CAUTION
Hold pin from falling to the ground when
bolt is removed.
h. Remove pin and reinsert pin in APT from top.
Form # 169080
UNLOADING AND ASSEMBLY
i.
j.
k. Remove pin (A) securing jack to APT and remove
l.
15
Remove four bolts securing shipping bracket at
front of APT, and remove bracket.
A
Remove banding from jack.
jack from shipping position.
A
Install at jack location at front of APT and secure
with pin (A).
Model Year - 2010