Table of Contents
Advertisement
CONVERTING FROM FIELD POSITION TO
TRANSPORT
5. Install lock pins (continued)
c. Install pin (E) to lock right wheel in transport
position. Secure with hairpin.
CONVERTING FROM TRANSPORT TO FIELD
POSITION
1. Reverse windrower while steering tractor front
wheels to the left to angle caster wheel inward.
See diagram, Step 1.
2. Drive forward to check that the caster wheel
will turn inward, i.e. rotate under the backsheet.
If yes, continue forward until wheel is starting to
face to the rear. See diagram, Step 2. If not,
repeat wheel positioning, Step 1.
3. Raise header to full height.
4. Place levers and pins in field position:
a. Remove lock pin (A) from telescoping hitch and
store. Secure with hairpin.
b. Rotate lever (B) on hitch to field position.
Form # 147021
OPERATION
RIGHT WHEEL LOCK - ENGAGED
B
HITCH LEVER & PIN - FIELD POSITION
33
E
A
Issue 05/05
Advertisement
Table of Contents
