Table of Contents
Advertisement
SYMPTOM
DRIVES (continued)
Sickle drive belt
whipping.
Draper drive belts come
off.
Reel final drive belt
comes off.
Primary reel drive belt
comes off.
DRAPERS
Excessive wear on one
side of drapers.
Rips or cuts in drapers.
Draper slippage causing
burns.
Excessive wear or
breakage of draper
slats.
Form # 147021
TROUBLE SHOOTING
PROBLEM
Loose belt.
Pulley or shaft bent.
PTO speed too high.
Belt guides missing.
Sickle loads excessive.
Idlers misaligned.
Belt misaligned due to
reel position.
Idlers misaligned.
Improper installation.
Drapers not tracking
parallel to cutterbar.
Rollers dirty or bent.
Insufficient draper
tension.
Bent draper tracks.
Foreign material (sticks,
wire etc.).
Insufficient draper
tension.
Insufficient draper
tension.
Lower draper track bent.
71
SOLUTION
Tighten belt.
Replace damaged part.
Maintain proper RPM on
PTO.
Install correct pulleys.
Install guides.
Clean and adjust sickle.
Reduce ground speed.
Adjust idlers.
Center reel and tighten
reel brace.
Adjust idlers.
Install correctly.
Adjust draper tracking.
Clean or replace roller.
Adjust draper tension.
Straighten draper
tracks.
Clear the area of foreign
material.
Adjust draper tension.
Adjust draper tension.
Straighten track.
REF.
52
47
---
7
52
48
19
60
54
22
59
56
---
58
---
---
58
58
---
Issue 05/05
Advertisement
Table of Contents
