Positioning The Boiler Stickers - Fröling SP Dual compact Installation Instructions Manual

6.11.1 Positioning the boiler stickers

M1820921_en | Installation instructions Dual fuel boiler SP Dual compact
r Install the controller cover on the front of the pellet unit
r Fit the tabs (A) on the controller cover into the slots on the side panel
r Secure the controller cover in place using two screws and contact washers
r Insert the cover into the cutouts on the side panel and slide it forward
r Secure the cover with a retaining screw
r Stick the supplied quick reference guide to the insulated door of the pellet unit in a
visible location
r Close the insulating door
r Remove the protective film from the sticker
r Position the backing film featuring "SP DUAL COMPACT" in the upper left corner of
the insulated door, ensuring all of the air bubbles have been removed
r Make several passes over the sticker so the writing adheres to the insulated door
r Carefully pull off the transparent backing film
Installation | 6
71