Install Firewood Boiler; Fit The Induced Draught Fan; Installing The Insulation - Fröling SP Dual compact Installation Instructions Manual

Dual fuel boiler

Hide thumbs Also See for SP Dual compact:

Table of Contents

6 | Installation

6.6 Install firewood boiler

r Fasten a shaft screw to the top hole on the ID fan housing

r Mount the seal for the induced draught fan on the shaft screw

r Fasten the induced draught fan using four hexagon screws including washers

IMPORTANT: The individual parts of the boiler insulation covered with a protective

film. The protective film must be removed before proceeding with the installation!

r Slide the floor insulation underneath the boiler from the front

r Wrap the thermal insulation around the ID fan housing

Ä Pay attention to the cutouts for the induced draught fan and Lambda probe

M1820921_en | Installation instructions Dual fuel boiler SP Dual compact

Table of Contents

Do you have a question about the SP Dual compact and is the answer not in the manual?

Sp dual compact 15 Sp dual compact 20