Design Information; Overview Of Standards; General Standards For Heating Systems; Standards For Structural And Safety Devices - Fröling SP Dual compact Installation Instructions Manual

3 Design Information

3.1 Overview of standards

3.1.1 General standards for heating systems

3.1.2 Standards for structural and safety devices

3.1.3 Standards for heating water

M1820921_en | Installation instructions Dual fuel boiler SP Dual compact
Perform installation and commissioning of the system in accordance with the local fire
and building regulations. Unless contrary to other national regulations, the latest versions
of the following standards and guidelines apply:
EN 303-5
EN 12828
EN 13384-1
ÖNORM H 5151
ÖNORM M 7510-1
ÖNORM M 7510-4
ÖNORM H 5170
ÖNORM M 7137
TRVB H 118
ÖNORM H 5195-1
VDI 2035
SWKI BT 102-01
UNI 8065
Boilers for solid fuels, manually and automatically fed combustion
systems, nominal heat output up to 500 kW
Heating systems in buildings - design of water-based heating
systems
Chimneys - Thermal and fluid dynamic calculation methods
Part 1: Chimneys serving one appliance
Planning of central hot water heating systems with or without hot
water preparation
Guidelines for checking central heating systems
Part 1: General requirements and one-off inspections
Guidelines for checking central heating systems
Part 4: Simple check for heating plants for solid fuels
Heating installation - Requirements for construction and safety
engineering, as well as fire prevention and environmental protection
Compressed untreated wood – Requirements for storing pellets at
the end customer's site
Technical directives for fire protection/prevention (Austria)
Prevention of damage by corrosion and scale formation in closed
warm water heating systems at operating temperatures up to 100°C
(Austria).
Prevention of damage hot water heating systems (Germany)
Water quality for heating, steam, cooling and air conditioning
systems (Switzerland)
Technical standard regulating hot water preparation.
DM 26.06.2015 (Ministerial Decree specifying the minimum
requirements)
Follow the instructions of this standard and any related updates.
(Italy)
Design Information | 3
7