Table of Contents
Advertisement
Installation
Connecting supply gases
Flow restrictor
Scre
w
Carrier gas inlet fit-
ting
Plate
3. Remove the flow restrictor from the flow controller with a pair of
4. Insert the alternate flow restrictor. Be sure the three O•ringsare in
O-ring for carrier gas inlet
fitting
O-ring for flow restrictor
O-ring for plate
5. Replace the brass carrier gas inlet fitting and plate to the flow
6. Replace the screw that holds the plate onto the flow controller block.
tweezers.
place.
controller block.
To prevent leaks, be sure it is tight.
Flow controller
block
27
Advertisement
Table of Contents
