ADJ MB DMX II User Manual page 12

O P E R AT I O N
Universal DMX Control:
This function allows you to use a universal DMX-512 controller to control rotation speed, rotation
direction, and the built-in power sockets (usually for pinspots). Operating through a DMX controller
allows you the freedom to create unique and customized programs tailored to your specific individual
needs.
1. The MB DMX II uses two DMX channels. Channel one controls power sockets located on the side
of the unit. Channel two control the motor's rotation speed and direction.
2. To control your motor in DMX mode, follow the set-up procedures on pages 8 - 9, as well as the
set-up specifications that are included with your DMX controller.
3. Use the DMX controller's faders to control the various DMX fixture traits. A list of the DMX traits and
values is located on page 17.
4. This will allow you to create your own programs.
5. When using a DMX controller and setting up for DMX operation follow the DMX addressing procedure
in your controller's manual. All fixtures must follow a specific DMX addressing protocol for proper
operation in DMX mode.
6. For help operating in DMX operation consult the manual included with your DMX controller.
7. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
12