Uc Ir & Airstream App Control - ADJ MB DMX II User Manual

U C I R & A I R S T R E A M A P P C O N T R O L
The UC IR (sold separately) infrared remote gives you control of various functions (See below). To
control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away.
To use the ADJ UC IR you must first connect the included IR receiver cable. Connect this cable to the
mini input jack located on the side of the unit near the dipswitches.
The Airstream IR (sold separately) remote transmitter plugs into the headphone jack of your iOS phone
or tablet. To control your IR fixture you must raise the volume to the maximum on your iOS phone or
tablet and aim the transmitter at the fixture sensor and be no more than 15 feet away. After you have
purchased the Airstream IR transmitters, the app is a free download from the app store for your iOS
phone or tablet. The app comes with 3 pages of control depending on the fixture you are using. Please
see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will turn the remote control option On and Off.
FULL ON - This will turn a connected light On and Off. FADE/GOBO - This button is invalid.
"DIMMER +" and "DIMMER -" - "Dimmer +" will rotate the ball clockwise and "Dimmer -" will rotate the
ball counter-clockwise.
STROBE - Press this button to activate strobing. COLOR - This button is invalid.
1-9 - Use buttons 1-8 to select your rotation speed. "1" being the fastest and "8" being the slowest. "9"
will pause/stop the motor from rotating.
SOUND ON & OFF & Show 0 - These buttons will control the strobe rate of a connected pinspot.
Sound On is slowest strobe speed, Show 0 is medium speed, and Sound Off is the fastest speed.
Sound On - 1Hz Show 0 - 3.5Hz Sound Off - 7Hz
13