Uc Ir/Airstream Control - ADJ STARTEC BOOM BOX FX2 User Manual

Boom Box FX2

UC IR/Airstream Control

The UC IR (sold separately) infrared remote gives you control of various functions (See below). To
control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet
away.
The Boom Box FX2 is also compatible with the Airstream IR app. The IR transmitter is available
through any ADJ dealer or through the ADJ parts website. Plug the transmitter into the headphone
jack of your iOS phone or tablet. To control your IR fixture you must raise the volume to the maxi-
mum on your iOS phone or tablet and aim the transmitter at the front of the fixture and be no more
than 15 feet away. After you have purchased the Airstream IR transmitters, the app is a free down-
load from the app store for your iOS phone or tablet. The app comes with 3 pages of control de-
pending on the IR fixture you are using. Please see below for IR functions including the correspond-
ing app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the
initial state.
FULL ON - Hold this button down to fully light up the unit. When you let the button go, the unit will
return to its previous state.
STROBE - Press and hold this button for strobing.
FADE/GOBO - This button is invalid for this fixture.
"DIMMER +" and "DIMMER -" - These button's is invalid for this fix-ture.
COLOR - This button is invalid for this fixture.
1-9 - Use buttons 1-9 to select your desired show when show mode is activated.
SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to find your desired show.
ADJ Products, LLC - www.adj.com - Boom Box FX2 User Manual Page 19