Table of Contents
Advertisement
U C I R & A I R S T R E A M I R R E M O T E C O N T R O L
The UC IR infrared remote gives you control of various functions, as described below. The fixture's
infrared sensor must first be activated as described in in Operating Instructions section of this
manual, and the remote must be aimed at the front of the fixture. Maximum range is 30 feet. Please
note that the fixture only responds to the remote when the fixture is set to primary mode.
The Airstream IR remote transmitter plugs into the headphone jack of your iOS phone or tablet. To
control your IR fixture, you must raise the volume to the maximum on your iOS phone or tablet and
aim the transmitter at the fixture sensor. Maximum range is 15 feet. After you have purchased the
Airstream IR transmitters, the app is a free download from the app store for your iOS phone or tablet.
The app comes with 3 pages of control depending on the fixture you are using. Please see below for
IR functions including the corresponding app page.
Works with App page 1.
•
STAND BY - Pressing this button will blackout the fixture. Press the button again will turn the fix-
ture back on.
•
FULL ON - Press this button down to fully light up the unit. Press this button again to return the
unit to its last mode of operation.
•
FADE/GOBO - This button activates fade mode.
•
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the output intensity.
•
STROBE - Press this button to activate strobing. Use buttons 1-4 to adjust the strobe speed,
where "1" is the slowest strobe speed and "4" is the fastest. Press this button again to stop strob-
ing.
•
COLOR - Press this button to activate color mode. Use buttons 1-9 to find your desired color.
•
1-9 - Use buttons 1-9 to select your desired color when color mode is active, or your desired pro-
gram when show mode is active. Use buttons 1-4 to select you desired strobe rate when strobing
is active.
•
SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.
•
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to select your desired show.
Press this button twice for show 10. Press button 1 twice for show 11.
21
Advertisement
Table of Contents
