Periods Of Inactivity; Scrapping The Unit - Quincy Compressor HP 15 Manual Use And Maintenance

16.0 PERIODS OF INACTIVITY

If the machine has to remain inactive for a long period:
- Close the ball valve Ref. 1 Fig. 22.
- Open the panel Ref. 2 and Ref. 7 Fig. 22.
- Depressurise the dryer by pressing the "TEST" condensation emptying button (for about 10-20 seconds) Ref. 3 or the WSD by pressing
test Ref. 6 Fig. 22 (if the dryer isn't available).
- Switch off the machine with pushbutton Ref. 4 Fig. 22: in this way the machine stops after idle time running.
- Turn off the disconnect switch, Ref. 5 Fig. 22.
- Close the panel Ref. 2 and Ref. 7 Fig. 22.
FIG. 22
4
During periods of inactivity the unit must be protected against atmospheric agents, dust and humidity which could damage the motor and the
electrical system.
To restart the machine after periods of inactivity, consult the manufacturer.

17.0 SCRAPPING THE UNIT

If the machine is to be scrapped, it must be dismantled into parts of the same material, to be disposed of according to the local regulations in
force.
ALWAYS RESPECT THE REGULATIONS IN FORCE FOR DISPOSING OF OLD OIL AND OTHER POLLUTING MATERIALS
SUCH AS SOUND-DEADENING, INSULATING FOAM, ETC.
.
5
2
1
7
1
3
6
Cod. 9828093052 04 - Edition 02/2018 - 35
ENGLISH
6