Quincy Compressor HP 15 Manual Use And Maintenance page 24

ENGLISH
Control mode selection
Function: to select the control mode, i.e. whether the compressor is in local control, remote control or controlled via a local area network
(LAN).
Procedure: starting from the main screen, make sure the action button Menu (1) is selected:
Next, use the scroll buttons to go to the Status icons (see Main screen) and select the Regulation icon (2). When the icon is active, this icon
is highlighted with a grey background color.
Press the enter button:
There are 3 possibilities:
Local control
Remote control
LAN (network) control
After selecting the required regulation mode, press the enter button on the controller to confirm your selection. The new setting is now visible
on the main screen. See section Used icons for the meaning of the icons.
Service menu
Function: to reset the service plans which are carried out, to check when the next service plans are to be carried out, to find out which
service plans were carried out in the past and to modify the programmed service intervals.
Procedure: starting from the Main screen (see Main screen), move the cursor to the action button Menu and press the Enter key.
Using the Scroll keys, move the cursor to the Service icon (see below).
Press the Enter key. Following screen appears:
Scroll through the items to select the desired item and press the Enter key to see the details as explained below.
24 - Edition 02/2018 Cod. 9828093052 04 -
(1) Service
(2) Overview
(3) Service plan
(4) Next service
(5) History