Ordinary Maintenance To Be Done By The User - Quincy Compressor HP 15 Manual Use And Maintenance

15.0 ORDINARY MAINTENANCE TO BE DONE BY THE USER

BEFORE CARRYING OUT ANY MAINTENANCE IT IS OBLIGATORY TO STOP THE MACHINE AND DISCONNECT IT FROM
THE POWER MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION NETWORK.
The maintenance jobs described in this chapter may be carried out by the user.
The more complex maintenance jobs which require professionally skilled personnel are listed in the chaper on GENERAL ROUTINE
MAINTENANCE. (See Chap. 21.0)
15.1 GENERAL INFORMATION
15.2 MAINTENANCE PROGRAMME
 OPERATIONS THAT MAY BE CARRIED OUT BY THE USER
 OPERATIONS THAT REQUIRE SKILLED PERSONNEL; THESE OPERATIONS ARE ILLUSTRATED IN PART B OF THIS
MANUAL.
These maintenance intervals are recommended for work environments that are not dusty and are will ventilated. For particularly dusty
environments, double the frequency of controls.
Every Day
Every 50 working hours
Every 500 hours
Every 2000 hours
Every 4000 hours
Every 8000 hours
Every 24000 hours
( ) Or as indicated by oil analysis.

Oil specifications:
It is strongly recommended to use genuine lubricants from your manufacturer. They are the result of years of field experience and research.
See section Preventive maintenance schedule for the advised replacement intervals and consult the Spare Parts list for part number
information.
AVOID MIXING LUBRICANTS OF DIFFERENT BRANDS OR TYPES AS THEY MAY NOT BE COMPATIBLE AND THE OIL
MIX MAY HAVE INFERIOR PROPERTIES.
.
 Purge condensate water from air receiver
Observe for unusual noise or vibration

Drain condensate from the oil tank

 Check the oil level
 Clean the filtering panel (VSD)
Clean the filter of the automatic discharge of condensate (dryer)

Check air receiver automatic drain (if applicable)

 Fixing electrical cables (at first 500 hrs)
Clean the air suction filter

Clean the condenser battery (on the dryer if fitted)

 Clean the dirt collection filter
 Check automatic condensation emptying (dryer)
Clean the water separator drain

 Clean the filtering panel (VSD)
 Clean the air suction filter
Clean the air filters

  Maintenance kit of the automatic condensate drain (dryer)
  Clean the finned surface of the air-oil cooler
Change the filtering panel (VSD)

  Replace the oil separator cartridge
  Change the oil filter
 Change the air filters
Change the air suction filter

  Retighten all power cable connections
  Safety temperature test
  Change the oil ( )

  Kit revision intake valve
  Checking the status of the oil return valve and oil pipes
  Kit revision minimum pressure valve
  Kit revision thermostatic valve
  Replace drain
  Kit revision of the compressor unit
  Kit revision of motor (bearings)
Cod. 9828093052 04 - Edition 02/2018 - 29
ENGLISH