Quincy Compressor HP 15 Manual Use And Maintenance page 31

BEFORE CARRYING OUT ANY MAINTENANCE IT IS OBLIGATORY TO STOP THE MACHINE AND DISCONNECT IT FROM
THE POWER MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION NETWORK.
15.5 CLEANING THE FILTERING PANEL (Compressors VSD)
- Switch off the machine with pushbutton Ref. 1 Fig. 18: in this way the machine stops after idle time running.
- Turn off the disconnect switch, Ref. 2 Fig.
- Remove the filter panel Ref. 1 (only compressors VSD) Fig. 19.
- Remove the filter panel Ref. 3, 4 Fig. 19
- Clean the filtering panel with a jet of air or wash it with water. Do not use solvents.
- Once the operation has been completed, reassemble the filtering panel Ref. 1 Fig. 19.
EVERY 50 WORKING HOURS, CLEAN
THE FILTERING PANEL.
7
15.6 CLEANING THE SUCTION FILTER OR CHANGING THE FILTER
- Switch off the machine with pushbutton Ref. 1 Fig. 18: in this way the machine stops after idle time running.
- Turn off the disconnect switch, Ref. 2 Fig.
HOT PARTS INSIDE
- Open the panel Ref. 2 Fig. 19.
- Open the cover Ref. 7 Fig. 19A.
- Remove the filter Ref. 8 Fig. 19A.
AVOID DROPPING FOREIGN BODIES INTO THE SUCTION MANIFOLD.
- Clean the filter with a jet of air, working from inside to outside, DO NOT USE WATER OR SOLVENTS. Alternatively, fit a new filter.
- Clean the disk on which the filter rests with a clean cloth.
- Fit the filter and the cover.
- If necessary, dispose of the old filter in conformity with the local regulations in force.
- Close the panel Ref. 2 Fig. 19.
.
18.
3
4
18.
2
1
8
Cod. 9828093052 04 - Edition 02/2018 - 31
ENGLISH
FIG. 19
FIG. 19A