Ip Address - ATEN Altusen KN9016 User Manual

KN9008 / KN9016 User Manual
(Continued from previous page.)
An explanation of the fields is given in the table below:
Field
HTTP
HTTPS
Program
Note: 1. If there is no firewall (on an Intranet, for example), it doesn't matter
what these numbers are set to, since they have no effect.
2. The service ports cannot have the same value. You must set a
different value for each one.

IP Address

The KN9008 / KN9016 can either have its IP address assigned dynamically at
bootup (DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain an IP address
automatically, radio button.
To specify a fixed IP address, select the Set IP address manually, radio
button and fill in the IP address, Subnet Mask, and Default Gateway fields
with settings appropriate for your network.
Note: If the KN9008 / KN9016 is on a network that uses DHCP to assign
network addresses, and you need to ascertain its IP address, see IP
Address Determination, page 145, for information.
56
The port number for a browser login. Valid entries are from 1–
65535. The default is 80.
The port number for a secure browser login. Valid entries are from
1–65535. The default is 443.
This is the port number that must be specified when connecting to
the KN9008 / KN9016 from the Win Client or Java Client AP
programs. Valid entries are from 1–65535. The default is 9000.
Explanation