Table of Contents
Advertisement
Introduction
The administration utilities, represented by the icons located across the top of
the web page, are used to configure the KN9008 / KN9016's operating
environment.
This chapter discusses each of them in turn.
Note: 1. As you make your configuration changes in each dialog box, click
Apply to save them.
2. Some configuration changes only take effect after a KN9008 /
KN9016 reset. For those changes, a check is automatically put in the
Reset on Exit box (see Customization, page 68). To have the changes
take effect, log out and then log back in again.
3. If you don't have Configuration privileges (see User Management,
page 66), the Administration configuration icons are not available.
Chapter 6
Administration
53
Advertisement
Table of Contents
