Table of Contents
Advertisement
Log Server
Important transactions that occur on the KN9008 / KN9016, such as logins and
internal status messages, are kept in an automatically generated log file
Specify the MAC address of the computer that the Log Server runs on in
the MAC address field.
Specify the port used by the computer that the Log Server runs on to listen
for log details in the Port field. The valid port range is 1–65535. The
default port number is 9001.
Note: The port number must different than the one used for the Program
port (see Program, page 56).
See Chapter 10, The Log Server, for details on setting up the log server. The
Log File is discussed on page 111.
Chapter 6. Administration
65
Advertisement
Table of Contents
