Hotkey Summary Table; Toolbar Icons - ATEN Altusen KN9016 User Manual

Hotkey Summary Table

The following table presents a summary of the Hotkey actions. To set the
Hotkey, see OSD/GUI Hotkey, page 96.
To...
Open the Toolbar The Toolbar is not open.
Open the GUI The Toolbar is open.
Open the GUI The Toolbar is not open.

Toolbar Icons

The meanings of the toolbar icons are explained in the table below:
Click to skip directly to the last port of the previous station.
Click to skip directly to the first port of the next station.
Click to skip directly to the first accessible port on the entire installation.
Click to skip directly to the first accessible port previous to the current one.
Click to begin Auto Scan Mode. The KN9008 / KN9016 automatically
switches among the ports that were selected for Auto Scanning under the
Configuration Scan Select function (see Scan Select, page 96). This allows
you to monitor their activity without having to switch among them manually.
Click to skip directly from the current port to the next accessible one.
Click to skip directly from the current port to the to the last accessible port
on the entire installation.
Click to recall the GUI.
Click to invoke Panel Array Mode (see page 93).
Click to close the Port Toolbar.
Click to log out and end the session.
Chapter 7. The Windows Client Viewer
When... Do This...
Click the GUI Hotkey twice.
Click the GUI Hotkey once.
Click the GUI Hotkey three times.
91