Table of Contents
Advertisement
KN9008 / KN9016 User Manual
OSD Main Screen
When you invoke the OSD, a screen similar to the one below appears:
The diagram depicts the administrator's main screen. The user main screen
does not show the F4 and F6 functions, since these are reserved for the
administrator and can't be accessed by users.
The OSD always starts in LIST view, with the highlight bar at the same
position it was in the last time it was closed.
Only the ports that have been set accessible by the administrator for the
current logged in user are visible (see Port Access, page 99 for details).
The OSD uses a tree view. If a switch's port list is collapsed, a plus symbol
displays in front of its Station Number. To see the ports click on the
switch's Station Number, or move the highlight bar to it then press the
right arrow key. If you wish collapse a switch's port list, click on the
switch's Station Number, or move the highlight bar to it then press the left
arrow key.
28
Advertisement
Table of Contents
