Table of Contents
Advertisement
KN9008 / KN9016 User Manual
Starting Up
To connect to the KN9008 / KN9016, either click its icon on the desktop or
click its entry on the Start menu. If this is the first time that you are running the
utility, a dialog box appears requesting you to input your serial number.
The serial number can be found on the KN9008 / KN9016's CD case. Key in
the serial number – 5 characters per box – then click OK to bring up the
KN9008 / KN9016 Connection Screen.
Note: 1. Letters in the serial number must be entered in capitals.
2. This dialog box only appears the first time you run the program. In the
future, you go directly to the Windows Client Connection screen.
To connect to the KN9008 / KN9016, click the WinClient.exe program icon (on
your desktop) to bring up the Windows Client Connection Screen:
Note: You must have DirectX 8.0 or higher installed on your computer. If not,
the Client program will not load.
122
Advertisement
Table of Contents
