CYP CPLUS-662CVEA Operation Manual page 27

COMMAND
ExtLineOut M Volume=Slow XXX
ExtLineOut M Delay=XXX
ExtLineOut M Mute
ExtLineOut M Unmute
ExtLineOut M Status
ExtLineOut M Name={NameString}
DESCRIPTION
Adjust the volume of an
extended line output in small
steps (0.5dB steps).
M = 1~2
XXX = "Up" or "Down"
Set the audio delay for an
extended line output.
M = 1~2
XXX = 0~230 (units: ms)
Mute an extended line
output.
M = 1~2
Unmute an extended line
output.
M = 1~2
Display the status of an
extended line output.
M = 1~2
Set the verbose name of
an extended line output.
Maximum 32 characters.
M = 1~2
Note: Can only rename one
port at a time. Multi-port is not
supported.
21