CYP CPLUS-662CVEA Operation Manual page 25

COMMAND
ZoneLineOut M Volume=Slow XXX
ZoneLineOut M Delay=XXX
ZoneLineOut M Mute
ZoneLineOut M Unmute
ZoneLineOut M Status
ZoneLineOut M Name={NameString}
DESCRIPTION
Adjust the volume of a zone
line output in small steps
(0.5dB steps).
M = A~F
XXX = "Up" or "Down"
Set the audio delay for a zone
line output.
M = A~F
XXX = 0~230 (units: ms)
Mute a zone line output.
M = A~F
Unmute a zone line output.
M = A~F
Display the status of a zone
line output.
M = A~F
Set the verbose name of a
zone line output. Maximum 32
characters.
M = A~F
Note: Can only rename one
port at a time. Multi-port is not
supported.
19