CYP CPLUS-662CVEA Operation Manual page 36

COMMAND
IR_Route HDBT_Out M0 M1 M2
IR_Route HDBT_Out M0 Show
30
DESCRIPTION
Select the IR source(s) for an
HDBaseT output.
M0 is the output port index.
M1 is the function to use.
M2 is the IR input source.
M0 = A~F (supports multiple
port selection by using "+".)
Available M1 values:
Add [Add M2 source to M0]
Del [Remove M2 source from
M0]
Available M2 values:
IR_InAll [IR In (ALL) input jack]
Generator [Internal IR
encoder]
Display the current IR source
of the HDBaseT output.
M0 = A~F (supports multiple
port selection by using "+".)