Push Buttons; Water Contacts; Mounting The High-Pressure Hose - Uwatec Aladin H User Manual

2.2.1

Push buttons

The Aladin H's features are accessed and
controlled with 2 push buttons. Operation
of these push buttons is divided into 2
methods: "press" and "press-and-hold"
(for 1 second) – also referred to as a "long"
press on the menu diagrams. Each method
allows you to access different computer
functions.
PRESS LEFT
BUTTON
PRESS AND HOLD (1
SEC) LEFT BUTTON
At the surface:
PRESS-AND-HOLD
BUTTON:
• Switches on the Aladin H (time of day
display).
PRESS-AND-HOLD RIGHT BUTTON:
• Functions like the ENTER/RETURN key
on a keyboard.
• Provides access to the displayed sub
menu.
• Opens the displayed setting.
• Confirms the displayed value or setting
selection.
PRESS LEFT OR RIGHT BUTTON:
• Allows scrolling through menus.
• Once entered into a sub menu or series
of settings:
• Increases (press right button) or
decreases (press left button) the
indicated value or setting.
PRESS-AND-HOLD LEFT BUTTON:
• Activates the backlight in time of day display.
• Escape the current function or menu to
last level or setting.
PRESS-AND-HOLD BOTH BUTTONS:
• Exits the current function or menu and
switches to the time of day display.
• From the time of day display, switches
off the Aladin H.
8
PRESS RIGHT
BUTTON
PRESS AND HOLD (1
SEC) RIGHT BUTTON
PRESS AND HOLD (1 SEC)
BOTH BUTTON
LEFT OR RIGHT
SCUBA mode:
PRESS RIGHT BUTTON:
• Accesses alternate displays.
PRESS-AND-HOLD LEFT BUTTON:
• Operates the backlight.
PRESS LEFT BUTTON:
• Activates the safety stop timer (dive
mode only, in depths < 5m/15ft).
• Sets bookmark.
GAUGE mode:
PRESS LEFT BUTTON
• Restarts stopwatch.
Diving with 2 or 3 mixtures:
PRESS-AND-HOLD RIGHT BUTTON:
• Initiates switch to gas d, gas 1 or gas 2.
• Changes selected gas (press left or right
button).
• Confirms switch to gas d, gas 1 or gas 2.
2.2.2

Water contacts

Upon submerging, the water contacts
activate the Aladin H automatically.
2.2.3 Mounting the high-pressure
hose
The Aladin H high pressure hose is
mounted on the 7/16" outlet (normally
marked with letters "HP") of the first stage
of the regulator.
Tighten the connection with a matching
wrench.
Connecting the dive computer with the
Quick Release (Option).
WARNING
Make sure that the tank valve is closed and the
regulator is depressurized before connecting
the quick release. If the quick release is
pressurized without the dive computer it will
close automatically.
ALADIN H USER MANUAL