Trace Cable For The Ie850A (Sold Separately) - Renesas IE850A User Manual

IE850A
2.2

Trace Cable for the IE850A (Sold Separately)

The trace cable is used to connect the IE850A and the emulator connector (34-pin ASP-137973-01
from SAMTEC) on the target system.
(2) Target-side connector
Figure 2-2 Names of the Parts of the Trace Cable for the IE850A (RTE0T0850AKCAC0000J)
(1) IE850A-side connector
This connector is for connection to the DEBUG I/F connector for the IE850A. After you have connected
it, tighten the screws on both sides of the connector.
(2) Target-side connector
This connector is for connection to the emulator connector (34-pin ASP-137973-01 from SAMTEC)
mounted on the target system, which includes the emulation adapter. Press the spring latches on both
sides of this connector when inserting or removing it.
(3) Spring latches
Press the spring latches on both sides when inserting or removing the cable and emulator connector.
Spring latches:
R20UT4461EJ0110 Rev. 1.10
Apr.22.19
(3) Spring latch
Be sure to press the spring latches when inserting or removing the cable and emulator
connector. Failure to do so will damage the cable or the connector on the target system.
Names and Functions of Hardware
CAUTION
(1) IE850A-side connector
Page 19 of 40