Christie J Series Setup Manual page 28

Section 3: Operation
Number Keys
Press 1 to 9 to enter a value in a text box or to select a menu item.
10+
Press 0 before pressing another number to enter a number greater than 9, e.g. press 0 then 2 to enter the number
12 as a menu selection.
Help
Press H to display context-sensitive help. Press H
ELP
Menu
Press M
to enter or exit the projector menu system.
ENU
OSD (On-screen display)
Press OSD then the D
one of the following:
• Press and hold OSD for two seconds.
• Press and release OSD followed immediately by U
• Press OSD, OSD.
Invisible menus are fully functional, enabling "hidden" access to numbered features and image adjustments by
entering the corresponding sequence of key presses on the keypad.
NOTE: With OSD "on", you can still hide error messages and slide bars by disabling these options in the
Menu Preferences menu.
Shutter
Press and hold S
single keystroke. Or press and release S
A K
(open) to guarantee the correct state (useful if you are unsure of the present state). Alternatively,
RROW EY
press S , S
HUTTER
A closed shutter blanks the display (turns it to black). Close the shutter to block the displayed image while
maintaining access to projector functions. Opening the shutter restores the image.
shows the current state of the shutter.
Function Key
IF WITHIN A NUMERIC FIELD IN A MENU: Use F
IF WITHIN A TEXT FIELD: Press F
between capital and lower case letters. Press F
insert or delete a character. Press F
3-6
NOTE: When entering numbers in a text field, this button acts as 0.
A
to hide the projector menu system during use. To see the menus again, do
OWN RROW
for two seconds to toggle the internal mechanical shutter blade closed or open with a
HUTTER
HUTTER
to toggle from the present on/off state.
HUTTER
2)
UNC
followed by E
UNC
again to toggle the help window OFF.
ELP
A
P RROW
followed immediately by U
The shutter is open upon power-up.
to enter a negative number.
UNC
followed by the U A
P
followed by the L
UNC
to delete all characters.
NTER
.
A K
P RROW EY
NOTES: 1)
K or D A
RROW EY OWN
A K or R
EFT RROW EY
J Series 2.0, 2.4, and 3.0 kW Setup Guide
(closed) or D
OWN
The LCD display
K
to convert
RROW EY
A K
to
IGHT RROW EY
020-100751-01 Rev. 1 (10-2011)