Removing Punch Holes From Images - Fujitsu FI-5530C2 Operator's Manual

2.13 Removing Punch Holes from Images

You can remove (obscure) punch holes (black dots) from scanned document images when
scanning punched documents.
Configure the Hole Punch Removal settings using the scanner driver.
Punch holes
The following shows the procedure to change settings in the setup dialog box of FUJITSU
TWAIN 32 Scanner Driver.
1. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the setup dialog box of the scanner driver, refer to
section "1.5 How to Use ScandAll PRO" on page
2. In the TWAIN Driver dialog box, click the [Option] button.
⇒ The [Option] dialog box appears.
3. Select the [Rotation] tab.

2.13 Removing Punch Holes from Images

Original
fi-5530C2 Image Scanner Operator's Guide
Created image
29.
2
81