How To Scan Documents - Fujitsu FI-5530C2 Operator's Manual

■ How to Display the Scanner Driver Setup Dialog Box
You can configure settings for scanning documents with the selected scanner in the
setup dialog box of a scanner driver.
Select the [Scan] menu, and then select [Setting] to display the setup dialog box.
For information about setting items you can configure, refer to section
Scanner Drivers" on page

■ How to Scan Documents

With ScandAll PRO, you can scan documents with a scanner, in either of two ways:
Scan
Batch Scan
32
FUJITSU TWAIN 32
12.
(page. 33)
You have to configure settings, such as the file format, destination, and scanning
parameters, every time you scan a document.
Use [Scan] when you want to scan a small amount of documents as necessary.
(page. 37)
You may want to use the same settings repeatedly. You can configure settings such
as the scanning parameters, destination, image-related properties, and an
application to link with and create a profile with these settings saved.
You can create more than one profile beforehand, so you do not have to configure
settings every time you scan documents. You only switch between profiles.
Use [Batch Scan] when you want to scan a large volume of documents using
various profiles.
FUJITSU ISIS
"1.4 How to Use