Fujitsu FI-5530C2 Operator's Manual page 152

ATTENTION
136
This scanner can scan ID cards through the Automatic Document Feeder
with the following precautions.
•
Place one card at a time into the Auto Document Feeder.
•
ID card feeding requires the card to be fed through the Auto Document
Feeder in portrait mode as in the following figure.
•
Smooth cards should be placed face down in the Auto Document Feeder.
•
The card to be scanned should be within the ISO7810 compliance, type
ID-1.
ISO7810-compliant, Type ID-1 card
Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm
Thickness: 0.03 ± 0.003inch / 0.76 ± 0.08mm
•
Embossed cards (on which a raised effect is created) cannot be scanned.
•
Cards that are excessively rigid or less flexible may not feed smoothly
and excessive noise may occur.
•
Cards should be clean from oil and without labels.
•
Cards cannot be scanned when the imprinter is installed.
LANDSCAPE