Fujitsu FI-5530C2 Operator's Manual page 25

5. Adjust the side guides to the width of the document.
Move the side guides so that they touch both sides of the document.
If there is any clearance between the side guides and the edges of the document, the scanned
image may be skewed.
The stacker prevents document sheets from being scattered after they
HINT
were scanned.
Use the stacker as follows:
1. Lift the stacker toward you by using your fingertips and the handle on
2. Lift the paper stop and extend it toward you by using your fingertips
6. Start up the scanner application, and then scan the document.
For details on how to scan documents using the ScandAll PRO application, refer to section
1.5 "How to Use ScandAll PRO" on page
Side guides
the scanner.
and the indentations on the stacker.
29.
fi-5530C2 Image Scanner Operator's Guide
1.2 Placing Documents on the ADF
handle
Indentation
1
9