Fujitsu fi-4530C Consumable Replacement And Cleaning Instructions
Hide thumbs
Also See for fi-4530C:
- Operator's manual (143 pages) ,
- Getting started (27 pages) ,
- Cleaning instructions manual (13 pages)
Related Manuals for Fujitsu fi-4530C
Summary of Contents for Fujitsu fi-4530C
- Page 1 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS fi-4530C & fi-5530C C ONSUMABLE EPLACEMENT LEANING NSTRUCTIONS CG00000-718301 Revision C...
-
Page 2: Kit Contents
& fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ONTENTS Pick Roller Qty 2 Pad Assembly Qty 5 F1 Cleaner Cotton Swabs Isopropyl Alcohol Qty 1 Qty 1 100/pack Lint Free Cleaning Paper Cleaning Cloths Qty 1 10/pack Qty 2 20/pack... - Page 3 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ONSUMABLES Description Life Fujitsu P/N Pick Roller 200,000 PA03334-0001 Pad Assembly 100,000 PA03334-0002 Pick Roller Pad Assembly Note: Replacement Cycles are estimated guidelines established by testing with A4/Letter sized woodfree and wood based 17 lb paper. NCR or Carbonless paper has chemical composition which damages the Pad, and the Pick Roller.
-
Page 4: Replacing The Pad Assembly
& fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE SSEMBLY A defective or improperly installed Pad Assembly can cause misspicks, skew, or double fed documents. To replace the Pad Assembly perform the following steps. • Remove all documents from Open ADF the ADF Paper Chute. -
Page 5: Pick Roller
& fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE OLLER • Remove all documents from ADF Paper Chute the ADF paper chute and take it off of the scanner. • Open the ADF using the ADF button. Front of... - Page 6 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE OLLER CONT • Lift the Pick Roller Shaft out of the scanner in the direction of the arrow. The bushing is fixed to the shaft on the end shown. On the...
- Page 7 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE OLLER CONT • Reinstall the Pick Roller Pick Roller Shaft with the new Pick Bushing Roller installed in reverse order used to remove the Pick Roller Shaft. • Be sure to lock the bushings in place on both ends of the shaft.
-
Page 8: Cleaning Materials
& fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING OCATIONS AND REQUENCIES Location Tools Frequency Cleaning Sheets Every 1,000 Sheets Pick Roller and Pad Cloth With F1 Cleaner Every 5,000 Sheets Plastic Feed Rollers Cloth With F1 Cleaner Every 5,000 Sheets... - Page 9 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE OLLERS WITH THE LEANING HEET The cleaning sheets are designed to remove only loose paper dust and ink from the rollers. Use the sheet approximately every 1,000 sheets scanned. They are to be used in between the thorough cleanings of the scanner.
- Page 10 LEANING THE WITH LOTHS Note: The glass surface inside the fi-4530C ADF becomes hot during scanner operation. Before performing this cleaning disconnect the AC adapter from the power outlet and wait at least 15 minutes for the scanner to cool.
- Page 11 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE WITH LOTHS CONT LEANING THE OLLER • Clean the Pick Roller by Pick Roller wiping it lightly with a lint- free cloth mostened with F1 Cleaner (90 % or higher Isopropyl Alcohol).
- Page 12 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE WITH LOTHS CONT LEANING THE LASTIC OLLERS Feed Rollers (2) Sheet Guide Pad Assembly Pick Roller Ultra Sonic Sensors (2) Plastic Rollers (4) Glass (2) Eject Rollers (2) •...
- Page 13 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS...
- Page 14 & fi-5530C C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS...