Fujitsu FI-5530C2 Operator's Manual page 96

4. Mark the [Split Image] checkbox.
HINT
ATTENTION
5. Click the [OK] button.
⇒ You are returned to the [TWAIN Driver] dialog box.
6. In the [TWAIN Driver] dialog box, click the [OK] button.
⇒ Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, refer to section
PRO" on page
80
When a double-sided document is scanned in Duplex mode, the
scanned document image is output according to the [Flip Side
Rotation] setting in the order presented below:
•
Book: Upper half
•
Fanfold: Lower half
If one of the following settings is set, this function is not available.
1. Multi Image Output
2. Color/Monochrome Auto Detection
3. The resolution is set to 1200dpi
29.
Lower half
Upper half
(page 74)
(page
"1.5 How to Use ScandAll
77)