CD Rom provides useful and detailed information on Operations when you would like to use advanced fea- tures, Daily Care for maintenance of the scanner, and Replacing Consumables to maintain conditions for smooth scanning. Please also read the "fi-5530C2 Oper- ator’s Guide"...
How Trademarks Are Indicated In This Manual References to operating systems (OS) are indicated as follows: Windows 2000 Windows XP Windows Server 2003 Windows Vista fi-5530C2 Image Scanner Getting Started ® ® Microsoft Windows 2000 Professional operating system. ® ®...
Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. fi-5530C2 Image Scanner Getting Started...
When the scanner is not going to be used for a long period of time, be sure to disconnect the power plug from the power outlet for safety.
If any parts are missing or defective, contact your scan- ner dealer or an authorized FUJITSU scanner service provider. Handle the scanner and accessories with care. 1.2 Names of Parts This section describes the names of parts.
Turns the scanner ON and OFF. Lights when the scanner is turned ON. *) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help and "fi-5530C2 Oper- ator’s Guide" on the Setup CD-ROM. ■ Indications on the Function...
Guide" on the Setup CD-ROM. 2. Attach the ADF paper chute. Hold the ADF paper chute and insert its tabs into the corresponding slots in the scanner as shown in the figure below. The Side guides of the ADF paper chute have to face up.
The factory initial setting for SCSI ID is . 1. Press the power button at least for two sec- onds to turn off the scanner if it is on. Discon- nect the AC cable from the outlet. 2. Set the SCSI ID using the SCSI ID switch on the back of the scanner.
FUJITSU ISIS (-> page 7) • Scanning application: ScandAll PRO (-> page 8) (Supports both FUJITSU TWAIN 32 and ISIS) Install either of the scanner drivers above and ScandAll PRO. The following sections describe the installation of respective drivers and the application.
Depending on the state of the operating system, the computer will once shut down and restart. In this case, the computer detects the scanner when it starts up. Do not remove the Setup CD-ROM from the CD drive until the computer completely starts up again.
[User Account Control] dialog box, click the [Continue] button, if it is displayed. The installation of FUJITSU TWAIN 32 is complete. Next, install ScandAll PRO (-> page 8). To make sure that FUJITSU TWAIN 32 is...
Control] dialog box, click the [Continue] button, if it is displayed. The installation of FUJITSU ISIS is complete. Next, install ScandAll PRO. To make sure that FUJITSU ISIS is suc- ATTENTION cessfully installed, perform a scan with a TWAIN-compliant application such as ScandAll PRO.
QuickScan Pro is image capturing software based on the ISIS standard. By using this software together with FUJITSU ISIS, you can scan documents with the scan- ner. Follow the procedure below to install the trial ver- sion of QuickScan Pro Be sure to log on as a user with "Adminis-...
® Adobe Acrobat Install Adobe Acrobat from the "Adobe Acrobat CD- ROM" provided with this scanner. Adobe Acrobat is a prerequisit for display- HINT ing manuals. * You do not have to install Adobe Acrobat if it is already installed on your computer.
[Preferences]. ⇒ The [Setup] dialog box appears. 4. On the [Scan] tab, select a driver. To check the operation of FUJITSU TWAIN 32, select "TWAIN." To check the operation of FUJITSU ISIS, select "ISIS." 5. Click the [OK] button to close the [Setup] dialog box.
⇒ You are returned to the [Scan Settings] dialog box. 12. Click the [Scan] button. When you are using FUJITSU TWAIN 32, HINT you may see the TWAIN Driver setup dia- log box again. If so, click the [Scan] button on the dialog box.
In the [Add or remove Programs] dialog box, you can view a list of installed applications. 4. Select an application you want to uninstall as follows: • To remove FUJITSU TWAIN 32, select "Scanner Utility for Microsoft Win- dows." • To remove ScandAll PRO, select "Fujitsu ScandAll PRO V1.0."...
If this does not restore the power supply, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. Push the power button again after completely starting up Windows. Load the document correctly on ADF paper chute.
[Device Set] tab to adjust scale. Clean the Feed rollers. For details, refer to section 3.2 "Cleaning the ADF"of "fi-5530C2 Operator's Guide." Adjust the [Sub-scan Setting] on [Scanners and Cameras] in the control panel. fi-5530C Image Scanner Getting Started Remedy AP-2...
A trouble in the Background switching mechanism. When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function Number Display, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.
Lint-free dry - Commercially available one cloth For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scan- ner. ■ Cleaning Method The ADF must be cleaned with a lint-free cloth moist- ened with the Cleaner F1.
0002 Pick roller PA03334- 0001 To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. The replacement cycles above are rough guidelines when using A4/Letter woodfree or wood containing paper 64 g/m (17 lb).
The contents of this manual are subject to change without notice. PFU LIMITED is not liable whatsoever for any damages resulting from use of this scanner and procedures described in this manual, profit loss due to defects, and any claims by a third party.