Fujitsu FI-5530C2 Operator's Manual page 33

If you select Color or Grayscale mode for a side (Front Image #1 or Back
HINT
Image #1), you can select only Binary (black-and-white) mode for the same
side (Front Image #2 or Back Image #2, respectively). In turn, if you select
Binary (black-and-white) mode for a side (Front Image #1 or Back Image
#1), you can select either Color or Grayscale mode for the same side (Front
Side #2 or Back Image #2, respectively).
Mode
You can select a color mode to use from the menu.
IPC
Black & White
16-level Grayscale
256-level Grayscale : Documents are scanned in 256 gray levels. In this mode,
24-bit Color
Auto Detect
16-level Grayscale
256-level Grayscale
24-bit Color
[Setup IPC] Button
Click this button when configuring settings for scanning with Image Processing
Software Option.
For how to configure settings for Image Processing Software Option, refer
HINT
to "Image Processing Software Option USER'S GUIDE". To view "Image
Processing Software Option USER'S GUIDE", from the [start] menu, select
[All Programs]
GUIDE].
1.4 How to Use Scanner Drivers
: Documents are scanned in binary (black-and-white) mode
with Image Processing Software Option. When this setting
is selected, the [Setup IPC] button below becomes
selectable. (This button is visible only if Image Processing
Software Option is installed on the computer.)
: Documents are scanned according to a binary threshold.
Black and white are distinguished based on this set
threshold. This mode is suitable for scanning line drawings
and text only documents.
: Documents are scanned in 16 gray levels. In this mode,
each pixel uses 4 bits.
each pixel uses 8 bits.
: Documents are scanned as 24-bit full-color images. This
mode is suitable for scanning color photographs. More
memory is used than in Grayscale mode.
: This mode automatically detects whether the scanned
documents are color or binary (black-and-white). In this
mode, color documents are output as color or grayscale
images, and monochrome documents are output as binary
(black-and-white) images. Under [Camera], configure
settings for detected-as-color documents with #1, and
configure settings for detected-as-black-and-white
documents with #2.
[Image Processing Software Option]
fi-5530C2 Image Scanner Operator's Guide
[USER'S
17
1