Fujitsu FI-5530C2 Operator's Manual page 139

Continued from the previous page
Is the document stack 10mm (A4)/
5mm (A3) or less?
YES
Is the Pad ASSY attached
correctly?
YES
Is the Pad ASSY dirty?
NO
Is the Pad ASSY worn out?
NO
If you cannot solve the problem
after taking measures, check the
items in "5.4 Items to check before
contacting the dealer where you
bought the scanner" and contact
the dealer or an authorized
FUJITSU service provider.
*1) For details on the requirements, refer to
*2) For details on multifeeds, refer to
139.
*3) For details on how to set paper thickness switch, refer to
Documents" on page 48.
*4) For details on how to clean the rollers, refer to
*5) For details on how to clean the Ultrasonic sensor, refer to the
on page 90.
*6) For details on how to replace (or attach) the Pad ASSY, refer to
ASSY" on page 99.
*7) For details on how to clean the Pad ASSY, refer to
5.3 Remedying Common Troubles
NO Reduce the number of
sheets in the stack.
NO
Attach the Pad ASSY
correctly.(*6)
YES
Clean the Pad ASSY.(*7)
YES
Replace the Pad ASSY.(*6)
"6.2 Document Quality" on page 133.
"6.5 Specifying How to Detect Multifeed" on page
"3.2 Cleaning the ADF" on page 90.
fi-5530C2 Image Scanner Operator's Guide
"2.3 Scanning Thin
"3.2 Cleaning the ADF"
"4.2 Replacing the Pad
"3.2 Cleaning the ADF" on page 90.
5
123