Fujitsu FI-5530C2 Operator's Manual page 84

■ To Specify the Area for Multifeed Detection
Normally, the multifeed detection function monitors paper overlaps at the central part of
sheets (width: 35mm). Therefore, some types of documents, such as the resume and
postcard, on which a photograph or stamp is pasted, may be accidently recognized as multi-
fed documents.
When scanning these types of documents, you can prevent multifeed errors by narrowing
down the area to be detected. Enable this function, following the procedure below.
1. Open the Scanner's Properties dialog box.
1) Turn on your scanner, and then check that the scanner is connected to a personal
computer. For information about how to connect the scanner to your personal computer,
refer to "2.2 Connecting the Scanner to a PC" in fi-5530C2 Getting Started on the CD-
ROM .
2) Double-click on the [Printer and Other Hardware] icon in Control Panel.
⇒ The [Printer and Other Hardware] window appears.
3) In the [Printers and Other Hardware] window, double-click on the [Scanners and
Cameras] icon.
⇒ The [Scanners and Cameras] window is displayed.
68