Page 3
FUJITSU LIFEBOOK T725 Operating Manual Declaration of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
Page 4
Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.
Telephone: (408) 746-600 Declares that product: Base Model Configuration: LIFEBOOK T725 Notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or or Windows 8/8.1 operating system, you will need to go to the Support Site to download the...
Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.
Wash your hands after using the device. This notebook complies with the relevant safety regulations for data processing equipment. If you have any questions about setting up your notebook in the intended environment, please contact your sales outlet or our Hotline/Service Desk. Fujitsu...
The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy saving functions as described in chapter "Using the energy saving functions", Page Fujitsu...
Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...
This situation may occur due to pre-operating system boot password security settings or some other application running on the notebook. • Attempting to transport the notebook while power is on may damage the notebook due to shock or overheating. Fujitsu...
If the notebook is exposed to water or other liquids with its connections open, liquid can penetrate the notebook and cause a malfunction. Do not continue to use the notebook. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at: "http://www.fujitsu.com/us/support/"). Fujitsu...
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu...
► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
► Slide the ON/OFF button (1) to the right to switch on the notebook. The ON/OFF button returns automatically to its original position. ► During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". Fujitsu...
There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu...
Please refer to the notes in the chapter "Important notes", Page Status indicators Statusindicators Symbols The status indicators provide information about the status of the power supply, the drives and the keyboard functions, etc. Fujitsu...
Page 25
Scroll Lock indicator The indicator is illuminated: The key combination Scroll Lock has been pressed. The effect that this key has varies between applications. Fujitsu...
Windows 8.1 Desktop - Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...
You must note that the screen cannot be turned completely on its own axis! From notebook to Tablet PC ► Raise the LCD screen into a vertical position. Fujitsu...
Page 29
At first you will feel some slight resistance, then the screen will turn easily and without friction. ► Turn the screen further until it has turned 180° and the hinge latches in. Fujitsu...
To switch off the automatic changing between portrait and landscape format, select Control Panel - Appearance and Personalization - Display - Screen Resolution. In the Fujitsu Tablet Controls settings, profiles are saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired.
Switching off the notebook Notebook ► Close all applications and then shut down the operating system (please see the "Operating System Manual"). ► Slide the ON/OFF button to the right. The ON/OFF button returns automatically to its original position. Fujitsu...
► Fold the LCD screen onto the bottom part of the notebook so that it locks into place. Handwriting recognition For detailed information on handwriting recognition, see the documentation for your operating system. Under Windows 8.1 you can set the required language under Control Panel – Time, Language and Region – Language. Fujitsu...
LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a specific resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.
finger input to open the tablet PC settings. ► Make sure that the monitor shown in the Display field corresponds to the screen that you want to calibrate. ► Tap or click on Calibrate, and then follow the instructions on the screen. Fujitsu...
Page 36
► Tap on the desired item with your finger. mouse button) Keep your fingertip pressed against the touchscreen. The context menu appears. Moving the cursor ► Position one finger on the touchscreen and move the finger in the desired direction. Fujitsu...
Page 37
Working with the notebook Actions using two fingers Action Description Scrolling ► Place two fingers on the touchscreen. ► Move the fingers up to scroll up. ► Move the fingers down to scroll down. Fujitsu...
Page 38
Working with the notebook Action Description Rotating ► Position your thumb on the touchscreen and rotate the image clockwise or anticlockwise using your index finger. Fujitsu...
Page 39
► Put two fingers on the touch screen and move them together to decrease the size of the view. Lock context-sensitive menus ► Use two fingers to tap twice in quick succession on the touch screen. Fujitsu...
The notebook is supplied with a stylus tether which you can attach to the eyelets on the stylus and on the notebook. Fujitsu...
Page 41
Opening a context Click with the right mouse button. Tap the desired item with the stylus menu and leave the stylus on the item for a moment. Moving the cursor - Place the tip of the stylus directly on the screen. Fujitsu...
► Replace the tip with one of the new tips that were supplied with your stylus. Insert the flat end of the tip into the barrel and exerting gentle pressure, push it in until it is firmly in place. If the tip is worn or damaged, discard it. Fujitsu...
Page 43
You can secure the stylus with a stylus tether to prevent accidentally dropping it or losing it. ► Secure the end of the stylus tether with the smaller loop to your stylus. ► Secure the end of the stylus tether with the larger loop to your notebook. Fujitsu...
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved. Switching the Touchpad on and off You can switch the Touchpad on and off using a key combination, "Key combinations", Page Fujitsu...
The following illustration shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustration may differ from your device variant. Alt Gr Fujitsu...
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...
Further information about the status indicators can be found in chapter "Status indicators", Page Country and keyboard settings ► Make the country and keyboard settings as described in the documentation for your operating system. Fujitsu...
This key combination increases the brightness of the screen. Fn+F7 Screenbrightness Decrease the volume This key combination reduces the volume of the internal speakers. Fn+F8 Volume Increase volume This key combination increases the volume of the internal speakers. Fn+F9 Volume Fujitsu...
Page 50
Cancel current operation This key combination can be used to halt an operation instantly Ctrl without clearing the keyboard buffer. Back tab This key combination moves the cursor back to the previous tab Shift stop. Shift+Tab Backtab Fujitsu...
This button has the same function as the Windows Start key on the keyboard. If the button is pressed in combination with the ON/OFF switch, the function is the same as for the Ctrl key combination. Increase volume Volume + button – Volume - button Decrease the volume Fujitsu...
The webcam automatically adjusts itself to the current light level. For this reason the LCD display may flicker while the light level is adjusted. Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam. Fujitsu...
Never store batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
"Preparing to remove components", Page ► Slide the locking device (1) in the direction of the arrow and hold it in place. ► Slide the locking device (2) in the direction of the arrow. ► Remove the battery from the battery compartment (3). Fujitsu...
► Place the battery on the lower edge of the battery compartment. ► Push the battery into the battery compartment until you feel it engage (1). ► Slide the release latch into its locking position (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
The battery is charged somewhere between 50 Green % and 100 %. Orange The battery is charged somewhere between 11 % and 49 %. The battery is charged somewhere between 1 % and 10 %. The LED is not lit The battery is discharged. Fujitsu...
The module can now be removed without any further actions being necessary. Removing a modular bay device Modular bay device Drive Weightsaver ► Slide the release mechanism (1) in the direction of the arrow and hold. ► Pull the modular bay device (2) out of the modular bay. Fujitsu...
Do not store an optical disk in areas subject to high temperatures or humidity. You may use 8 cm / 3.15 inch or 12 cm / 4.7 inch diameter optical disks in the drive. When using a poor quality optical disk, vibrations and read errors may occur. Fujitsu...
► Gently pull the drive tray (2) completely out. ► Place the optical disk in the drive tray with the printed side facing upwards. ► Remove an inserted optical disk. ► Push in the drive tray again until you feel it lock into place. Fujitsu...
► Switch your notebook off. ► Push a pen or a piece of wire (such as a paper clip) firmly into the opening (1). The drive tray will be ejected. You can now pull the drive tray (2) out of the drive. Fujitsu...
If you do not intend to use your notebook for a long period of time: ► Exit energy saving mode if necessary by moving the mouse, making an entry at the keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...
To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. You can find information on connecting headphones and a microphone in chapter "Connecting external devices", Page Fujitsu...
► Insert the SIM card (2) in the SIM card carrier as shown symbolically on the SIM card carrier. ► Push the SIM card carrier back into its location (3). ► Install the rechargeable battery again, see "Installing a battery", Page Fujitsu...
"Installing a battery", Page Optional wireless LAN/Bluetooth/4G radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Depending on the device configuration you ordered, your device will be equipped with wireless LAN, Bluetooth or 4G.
"WLAN specifications", Page 105. Access via Wireless WAN You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer. If you have ordered a Wireless WAN module, your device will already be prepared when you receive it. You will find information on establishing the connection with the Wireless WAN network in the documentation for the hardware you plan to use.
► Connect the network cable to your network connection (2). Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...
You can use up to three screens with the optional port replicator and therefore bring multi-tasking to a new level. With three screens, you can for example copy content from a document on one screen into a document on a second screen and, at the same time, have your e-mails displayed Fujitsu...
► Disconnect the AC adapter cable from the DC input connector (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the port replicator. ► Place the notebook onto the port replicator (1) and ensure that it locks into place correctly. Fujitsu...
Switching on the notebook via the port replicator ► Press the ON/OFF button on the port replicator to switch the notebook on. The power-on indicator of the port replicator lights up. Fujitsu...
We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...
If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance. Fujitsu...
Brief overview of the security functions Detailed information about the security equipment of your system can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on our website at "http://solutions.us.fujitsu.com". Security function Type of protection...
► Install the fingerprint software to be able to use the fingerprint sensor (1). You can obtain further information on the fingerprint sensor in the "appendix: Miscellaneous Information". Fujitsu...
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Start the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as when assigning a password. Fujitsu...
If a supervisor password was set, an additional password for the hard disk can be set in the Hard Disk Security menu. The hard disk is protected by this password. Data on this hard disk can then only be read in another system if the correct password is entered. Fujitsu...
Do not use force when inserting and removing the Smart Card. Make sure that foreign objects do not fall into the Smart Card reader. ► Slide the Smart Card into the Smart Card reader with the chip facing upwards (or downwards depending on the device) and to the front. Fujitsu...
► Mark the TPM Security Chip Setting field and press the Enter key. ► Select the entry Disabled to disable the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will now reboot with TPM deactivated. Fujitsu...
For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...
You can also switch back and forth between the external monitor and the LCD screen of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu...
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognized and installed by your operating system. Fujitsu...
You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp), even if the notebook is switched off. Fujitsu...
► Click on the symbol for safe removal of hardware with the left mouse button. ► Select the device you wish to shut down and remove. ► Press the "Enter" key. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...
If you buy a cable from a retailer, please note the following information: The headphones port on your notebook is a "3.5 mm jack". If you want to connect headphones or speakers you will need a "3.5 mm jack plug". Fujitsu...
The equipment and tools you use must be free of static charge. • Remove the AC plug from the power outlet before inserting or removing boards. • Always hold boards by their edges. • Never touch connector pins or conductors on the board. Fujitsu...
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...
Removing a memory module ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module will fold upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...
► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover into position, following the direction of the arrow (1). ► Fasten the cover in place with the screw (2). Fujitsu...
If you install the wrong screws, components may be damaged. ► Slide the cover in direction of the arrow (2). ► Lift the cover off the notebook (3). Fujitsu...
Removing and installing components during servicing Removing the hard disk ► Unfasten the hard disk fastening (1). ► Remove the hard disk from the hard disk compartment (2). Fujitsu...
Removing and installing components during servicing Installing a hard disk ► Place the hard disk into the hard disk compartment (1). ► Attach the hard disk fixing (2). Fujitsu...
► Install the battery again, see "Installing a battery", Page ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu...
► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service center. The BIOS Setup Utility starts. Fujitsu...
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system.
The notebook’s LCD screen remains blank LCDscreen BlankLCDscreen Cause Troubleshooting Screen is switched off. ► Press a key or touch the touchpad. External monitor or television set connected. ► Press the key combination for changing over the screen output, see "Key combinations", Page Fujitsu...
Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...
► Charge the battery. ► Insert a charged battery. ► Connect the AC adapter to the notebook. The AC adapter is not connected properly. ► Check whether the AC adapter is properly connected to the notebook. ► Switch the notebook on. Fujitsu...
The wireless component is switched on. Despite ► Check whether the wireless connection is this, the wireless connection to a network does enabled by the software. not work. ► Further information on using the wireless component can be found in the help files. Fujitsu...
Supervisor PIN. Smart Card lost Cause Troubleshooting Smart Card lost. ► If you are working in a network, contact your system administrator, who can boot your notebook with a Supervisor Smart Card. Fujitsu...
(for a charge). Acoustic warning Acoustic warnings Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost dead. Fujitsu...
Press <F1> to resume, <F2> to SETUP ► Press the function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu...
Page 105
► Contact your sales outlet or our customer service center. System cache error - Cache disabled ► Contact your sales outlet or our customer service center. System timer error ► Contact your sales outlet or our customer service center. Fujitsu...
316 mm x 233 mm x 25.4 - 31.3 mm / 12.43 inches x 14.76 inches x 1 - 1.23 inches with rubber feet Weight depending on configuration from 1.74 kg / 3.84 lbs Input devices Keyboard 85 buttons, splashproof Touchpad 2 keys Fujitsu...
Peak – 11a/b/g/n/11ac), Wi-Fi based* Transfer rate (Automatic switching) IEEE802.11 a and g: 54 Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate Active frequency • 802.11n: 2.4 GHz or 5 GHz • 802.11b/g: 2400~2473 MHz • 802.11a: 4900~5850 MHz Fujitsu...
Page 108
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the fixed length of 24 bits the user may however also set 40 or 104 bits. **** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. Fujitsu...
–15°C ..60°C / 5°F ..140°F Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". In addition to the main battery, you can order an optional battery which is inserted in the module slot. All rechargeable batteries are 6-cell batteries.
50 Hz to 60 Hz (automatic) Max. rated current 0.7 A to 1.2 A Secondary Rated power 80 W Rated voltage 19 V Max. rated current 4.22 A An additional AC adapter or AC cable can be ordered at any time. Fujitsu...
Remember – protecting the environment is a cooperative effort, and we must make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"...
For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction. Fujitsu...
To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.
This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu...
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. Fujitsu...
ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Fujitsu...
: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.
(ce qui signifie qu’ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences et/ou des dommages aux appareils de réseau exempts de licence. Fujitsu...
That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu...
Page 120
Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases). Fujitsu...
Page 121
Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Fujitsu...
After you have configured your computer, you can connect to an active network by performing the following steps: 1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Fujitsu...
Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu...
Page 124
LAN device to associate but not authenticate to the wireless network. Incorrect IP address This only applies to networks configuration using static IP addresses. Please contact your network administrator for the correct settings. Fujitsu...
FCC and Industry Canada and the warranty. Image Backup and Recovery Procedures Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important that you create DVD copies of your Recovery Image and Bootable Disk before beginning to use your system.
Appendix Creating a Backup of Essential Access Software When you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to “C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packages along with the extracted Auto Installer software package to a selected location. It is recommended that you save these packages to writable media or an external drive.
Page 128
To verify/change the boot-up priority (rather than booting-up from the hard drive or an external media drive), perform the following steps: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disk into the drive tray.
1. Press the Diagnostics Tool button to start the Diagnostics tool. 2. Read the note, and then click OK. 3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse.
3. On the Recovery Tool - Partition Creation screen, move the slider to set disk size, and then click OK. 4. Click Yes in the Partition Creation confirmation dialog. WARNING: It is highly recommended that you send your product to Fujitsu Service to replace a hard drive. A mistake could possibly destroy your computer, your new hard drive or both.
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note: You will need the Bootable disk and Recovery Image disk set for this recovery. 1. Power on your system. When the Fujitsu logo appears on the screen, press the Enter key.
The below listed steps are applicable only in cases in which the recovery image restore and hidden partition contents have not been wiped out. 1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”. 2. Double-click on “Fujitsu Software Auto Installer” desktop icon.
Page 133
A message will be displayed during this time stating, “Please wait while the content is being processed”. 4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 5. The Fujitsu Software Auto Installer user interface will be launched providing ability to auto install the essential access software on the system.
Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download a list of the most current drivers, utilities, and applications to determine whether you have the latest versions.