Local Setup From The Colorpass; Network Server Setup Requirements - Canon Z5000 Configuration Manual

2
2-8 Preparing for ColorPASS Setup

Local Setup from the ColorPASS

Subsequent Setup can also be performed locally at the ColorPASS using Server Setup,
a Windows NT Control Panel. Some of the settings you specify in Server Setup
configure the Server process (such as print job defaults) while some configure the
Windows NT Workstation environment (such as system date and time). Depending
on the settings you change in Server Setup, Windows NT must be restarted before
your changes take effect.
Setup options for local Setup are divided into three groups:
General Setup
Network Setup
Printer Setup
Setup from the Command WorkStation has a different interface, but allows you to set
most of the same options.

Network server setup requirements

For Token Ring, Novell, and Windows NT (using TCP/IP) networks, the network
servers must be configured for printing to the ColorPASS before you configure
ColorPASS network settings in Setup. The diagrams in Chapter 1 give chapter
references for network server setup.
To configure network settings in Setup, you need a live network connection so the
ColorPASS can query the network for zones, servers, and server-based queues.
Whenever the configuration of the ColorPASS, the copier, or the network itself
changes at your site, you can alter individual settings to correspond to the changed
environment. Changing network or port settings may require that you make changes
to other Setup options as well.
System settings, passwords, and Job Log options
All the active network systems that will transmit print jobs to
the ColorPASS
ColorPASS print connections to be made available to users,
and color defaults for jobs