Setting The Weblink Destination - Canon Z5000 Configuration Manual

5
5-17 Configuring the ColorPASS and clients for Fiery WebTools
T F W T
O SET UP IERY EB OOLS ON A COMPUTER
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
address if needed.
3. Install an Internet browser that supports the Java language and frames.
Make sure Java is enabled. See Getting Started for more information on supported
browsers and on Fiery WebTools requirements.
T F W
O ACCESS THE IERY EB
1. Start the Internet browser.
2. Enter the IP address or DNS name of the ColorPASS.
3. Press Enter.
The ColorPASS home page appears. Click the name of a particular WebTool to use it.
4. Use the Configure button to enable only certain WebTools for users.

Setting the WebLink destination

The pre-set WebLink destination can be changed; this function requires the
Administrator password, if one has been set.
T W L
O CHANGE THE EB INK DESTINATION
1. Start your Internet browser application.
2. Enter the IP address or the DNS name of the ColorPASS.
The ColorPASS home page appears.
3. Enter the Administrator password (if required) and click OK.
4. Press the Ctrl key as you click the WebLink button.
The Update WebLink dialog box appears.
5. Enter the new WebLink address (URL) and click OK.
:
T :
OOLS
: