Canon Z5000 Configuration Manual page 32

2
2-6 Preparing for ColorPASS Setup
3. A designated administrator and a superuser operator
Only an administrator can perform Setup, calibration, and other administrator
functions, and only an operator or administrator can control jobs from the job
management tools. Users can print to all ColorPASS print connections.
4. A designated administrator and a designated operator, no Fiery WebTool access
Only an administrator can perform Setup, calibration, and other administrator
functions, and only an operator or administrator can control jobs from the job
management tools; users can print to the Hold queue and the Print queue, but not
to the Direct connection; the operator controls all job flow, but jobs sent to the Print
queue may not require operator intervention; no access to Fiery WebTools.
5. (Strictest control) A designated administrator and a designated operator, no Fiery
WebTool access, operator controls all jobs
Only an administrator can perform Setup, calibration, and other administrator
functions, and only an operator or administrator can control jobs from the job
management tools; users can print only to the Hold queue; the administrator and
the operator have complete control of job flow; no access to Fiery WebTools.
Use these settings
in Setup:
Enable Direct connection
Enable Print queue
Enable Web Services
Set an Administrator Password
(strongly recommended)
Set an Operator password
1 2
(Least)
3 4
(Strictest)
5