Configuring A Netware 5.X Server For Printing - Canon Z5000 Configuration Manual

5
5-3 ColorPASS on a NetWare 5.x network with NDPS
Configuring a NetWare 5.x server for printing
Before you begin
The following procedure assumes NDPS has been installed during NetWare 5
installation and that a Broker is running on the server. Unless you have manually
unloaded the Broker, it loads and runs when you install NDPS. Make sure you are
using the latest NetWare 5.x service pack and Novell Gateway. Finally, create an NDPS
Manager. For more information, see your NetWare documentation.
In ColorPASS Setup, make sure you have enabled TCP/IP (page 3-15) and LPD
printing (page 3-22) on the ColorPASS. You can ping the ColorPASS (page 5-20) to
verify that TCP/IP communication is successful.
Setting up the ColorPASS printer driver
You first need to create a directory for Windows NT 4.0/2000 or a folder for Windows
95/98/Me in the NetWare server for NDPS to install the corresponding printer driver
files from the User Software CD.
T
O SET UP THE PRINTER DRIVER FOR
1. Login to the Novell file server as a superuser or Administrator.
2. In the SYS:ndps\resdir\Prndrv\NT4/2000 directory, create a directory called Fiery.
3. From the User Software CD, copy the contents of the
ENGLISH\INSTALRS\PS_DRVR\WIN_NT/2000 folder to the Fiery directory.
T
O SET UP THE PRINTER DRIVER FOR
1. Login to the Novell file server as a superuser or Administrator.
2. In the SYS:ndps\resdir\Prndrv\Win95/98/Me directory, create a folder called Fiery.
3. From the User Software CD, copy the contents of the
ENGLISH\INSTALRS\PS_DRVR\WIN_95/98/Me folder to the Fiery directory.
W NT 4.0/2000:
INDOWS
W 95/98/M :
INDOWS E