Canon Z5000 Configuration Manual page 63

3
3-27 Network Setup options
Network Setup
Service Setup
PServer Setup
Exit Bindery Setup
Add File Server
View Server List
Edit Connection
Bindery Setup
Remove File Server
Bindery Setup
Bindery Setup options
Bindery Setup
Use Bindery Setup if you have already configured one or more bindery servers (file
servers running NetWare 3.x or NetWare 4.x/5.x in bindery emulation) with a Print
Server and a Print Queue for ColorPASS jobs. Before entering bindery settings, be
sure the ColorPASS is connected to the network and the NetWare file server is
running. If Guest Login is not supported, you need a valid user name and password.
The terms NetWare server, Novell server, and IPX file server are in common use
N :
OTE
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Bindery Setup menu
Because you can set up more than one Novell server to handle ColorPASS print jobs,
an additional menu is displayed for this purpose. The options are:
• Add File Server—creates a new file server connection to the ColorPASS. You can set
up a maximum of eight file server connections. After you have finished adding a new
server, you return to the Bindery Setup menu, and you can set up another server if
you wish.
• View Server List—displays the list of file servers that have already been selected to
communicate with the ColorPASS.
• Edit Connection—lets you change the NetWare Print Server that will print to the
ColorPASS.
• Remove File Server—lets you disconnect the ColorPASS from a file server to which
it is currently connected. Remove a file server when you want to reduce the number
of connections to the ColorPASS or re-assign the connection to a different NetWare
file server.
• Exit Bindery Setup—after you added all servers, viewed a list of file servers, or
removed a file server from the list.
If you change your mind about any of the menus you have selected, you can use
N :
OTE
the Menu button to escape and return to the main Bindery Setup menu. To cancel all
changes you must exit Network Setup and select No to Save Changes.