Table of Contents
Advertisement
3
3-40 Performing Setup from the Control Panel
CMYK Simulation Profile
SWOP-Coated (EFI)/DIC (EFI)/Euroscale (EFI)/None [SWOP-Coated (EFI)]
CMYK simulation allows color correction to simulate printed output on a commercial
press, so that the ColorPASS output can be used for proofing. The SWOP-Coated
standard is used in the United States, DIC in Japan, and Euroscale in Europe. Custom
simulations are user defined and named. The simulations provided with the
ColorPASS have the designation "EFI" after their names.
If any custom simulations have been created and loaded on the ColorPASS with
ColorWise Pro Tools, they also appear in the list of simulations. A custom simulation
can be selected as the default simulation. See the Color Guide for more information
about custom simulations.
CMYK Simulation Method
Quick/Full [Full]
Quick simulation assumes that the copier toners match the printer's inks, and all
changes affect only one color (C, M, Y, or K) at a time. Full simulation allows for more
flexibility in matching toner to ink and all changes interact to maintain a better color
balance.
RGB Separation
Output/Simulation [Output]
This option defines how the ColorPASS processes RGB jobs. Select Output for RGB
jobs that you print to the final output device. Select Simulation to simulate an output
device that is not the device to which you are printing.
Output Profile
Default profile
Specify the default output profile to use for printing. Additional profiles can be created
and downloaded to the ColorPASS with ColorWise Pro Tools.
Advertisement
Table of Contents
