Runtime Error Messages - Canon Z5000 Configuration Manual

6
6-10 Administering the ColorPASS

Runtime error messages

For error messages related to canceling jobs and printing, including the
message and alerts to load media, see the Job Management Guide. These messages are
reported by the job management tools.
Users can turn on PostScript error reporting as a print option from Mac OS
applications.
Check power and cable
This message indicates that the interface cable between the ColorPASS and the copier
is not connected, or a print job is ready but the copier is not turned on.
Printer not found
Most failures to find a printer on the network are due to conflicting or missing name or
address settings for the ColorPASS. You must enter names in specific places. The
required names are:
• TCP/IP host name (also known as the DNS name), which is defined by your
organization.
Enter the host name as the Server Name in ColorPASS Setup.
• Remote printer (internal machine) name. Use one of the following:
print
hold
You must reconfigure one of the Fiery utilities on each workstation if you change the
DNS name (also known as the TCP/IP host name) of the ColorPASS.
Disk Full