Postscript Setup Options - Canon Z5000 Configuration Manual

3

3-37 PostScript Setup options

T P
O ACCESS
1. In the main Setup menu, choose PS Setup.
PS Setup
Color Setup
2. Enter the options appropriate to the printing requirements at the site.
Job Log Setup
Change Password
Setup
3. When you have finished, save changes.
PostScript Setup options
PS (PostScript) Setup allows you to set defaults for the ColorPASS. Users can override
most of these defaults on a job-by-job basis. However, users printing from UNIX or
DOS command lines cannot override defaults from their applications. Therefore, you
must set defaults in PostScript Setup. For information about these defaults, see the
Printing Guide.
S S
OST CRIPT ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in square
brackets.
Default Paper Sizes
US/Metric [default is US in the United States, but Metric in Europe]
Specify whether to print on US paper sizes (for example, letter, legal, 11
paper sizes (for example, A4, A3) by default. When no page size is defined within a
PostScript file, jobs are printed on Letter paper if you selected US, or A4 paper if you
selected Metric.
Convert Paper Sizes
No Letter/11x17->A4/A3 A4/A3->Letter/11x17 [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11
is automatically printed on A4 paper. If you select No, the ColorPASS prints the
document only if it finds a media source in the size specified by the file.
This option works in conjunction with the Default Paper Sizes option. For
N :
OTE
example, if Convert Paper Sizes is set to Letter/11
Sizes is set to US, then jobs are printed A4/A3 size. This also includes ColorPASS
system pages such as the Start Page, Test Page, and Job Log.
:
17->A4/A3, a letter size document
x
17 -> A4/A3, and Default Paper
x
x 17), or Metric