Set-Up And Start-Up; Setting Up And Connecting The Device; Attach/Remove The Compact Plus Pole Clamp; Operating The Device On A Stand - B. Braun Infusomat compact plus P Instructions For Use Manual

Set-up and start-up

7 Set-up and start-up
Setting up and connecting
7.1
the device
Attach/remove the compact
7.1.1
pole clamp
Note: The compact
the device.
The compact
Q
only be removed or re-attached by a
service technician.

Operating the device on a stand

7.1.2
Press the lever on the compact
Q
pole clamp.
Turn the compact
the desired position.
Turn the compact
Q
the lever clicks into place.
Operating the device in the
7.1.3
plus
compact
Follow the compact
Q
tions for use.

Operating the device on a wall rail

7.1.4
Press the lever on the compact
Q
pole clamp.
Turn the compact
desired position.
Turn the compact
Q
the lever clicks into place.
Make sure that the compact
Q
clamp is not fixed at the point where
the wall rail is attached to the wall.
22
38932401_Infusomat_compactPlusP_EN_IFU_1020_v5.indd 22
plus
plus
pole clamp is fixed to
plus
pole clamp should
plus
plus
pole clamp to
plus
pole clamp until
station
plus
station instruc-
plus
plus
pole clamp to the
plus
pole clamp until
plus
pole
Connecting the device to the
7.1.5
mains electricity
DANGER! Risk of death from electric
shock.
Connect the power cable with mains
Q
connection to the device.
Position the power cable so that it
Q
does not present a trip hazard.
Plug the mains plug into the socket.
Q
Operating the device on
7.1.6
battery power
Ensure that the battery in the device is
Q
fully charged.
Powering on the device
7.2
for the first time
Device switched on
Q
Select and insert the line,
Q
see section 8.2.
Configure additional device settings,
Q
see section 7.3.

Configure device options

7.3
Device switched on
Q
No patient connected
Q
No ongoing infusion
Q
Press the Menu key.
Q
The main menu is displayed.
Select Settings... and press OK to
Q
confirm.
The "Settings" screen is displayed.
15.10.2020 17:47:27