Bios Setup Utility - Delta M815-MX Series Manual

3. BIOS Setup Utility

This chapter describes how to configure the system with the BIOS Setup Utility. It
also describes system parameters and which parameter to select for your particular
needs. The motherboard provides a 4MB, 32pin-PLCC package FWB that can be
updated using provided BIOS utility. The setup utility is like a database of the hardware
that is installed in your system. It contains information about the configuration of the
hardware.
When you have assembled your system, you should immediately run the setup utility
to configure the new hardware that you have used to build your system. Thereafter,
you may not need to attend the setup utility again unless you make changes to the
hardware configuration of the system.
If you are not sure how to configure the Setup utility, we suggest that
you select "Load Optimized Defaults" on the Main Menu screen, then
exit saving changes. This loads optimized default settings for normal
use.
Running the Setup Utility
To run the setup utility immediately when booting your system, press the <Delete>
key when prompted to enter the Main Menu.
Use the following keys to work with the setup utility. Available key operations are also
indicated at the bottom of the screen.
3. BIOS Setup Utility
M815-MX Series User's Manual
31